KufCad

Commands ADC – CUTCLIP

CommandAliasRibbonDescriptionGuide
ADC✅ Open Design Center.ADCENTER — DesignCenter
ADCENTERDC, CONTENT, DCENTER, ZDCENTER✅ Open Design Center to browse blocks, layers and styles of other drawings.Palettes and docking
ADDSELECTED✅ Create a new object of the same type and properties as the selected one.
AIMLEADEREDITADD✅ Add leader lines to a multileader.
AIMLEADEREDITREMOVE✅ Remove leader lines from a multileader.
ALIASEDIT✅ Edit the command alias list (alias.pgp).Customizing aliases (PGP)
ALIGNALDraw ▸ Modify ▸ Align (▾)✅ Aligns objects with other objects: ALIGNALIGN — Align by points
ANNOHATCH✅ Make hatches annotative.
ANNOSCALE✅ Set the current annotation scale.
ANNOTATIVE✅ Set the annotative style for text, dimensions, hatch and more.
APPLOADAP✅ Load KufLISP / VBA / .NET files into the session.KufLISP
ARCA✅ Creates an arc: ARCARC — Arc
ARC_CONT✅ Creates an arc tangent to the last line or arc: ARC
ARC_CSA✅ Creates an arc from center, start and included angle: ARC
ARC_CSE✅ Creates an arc from center, start and end: ARC
ARC_SCA✅ Creates an arc from start, center and included angle: ARC
ARC_SCE✅ Creates an arc from start, center and end: ARC
ARC_SED✅ Creates an arc from start, end and start tangent: ARC
ARC_SER✅ Creates an arc from start, end and radius: ARC
AREAAADraw ▸ Groups ▸ Area✅
AREAOBJ✅ Report the area of a closed object.
AREDIT✅ Edit an associative array (ARRAYEDIT).
ARP✅
ARPATH✅
ARRAYAR✅
ARRAYCLASSIC◐ Creates an array from the Array dialog: ARRAYCLASSIC The classic ARRAY dialog is partial; use ARRAYRECT / ARRAYPOLAR / ARRAYPATH.
ARRAYEDITDraw ▸ Modify ▸ Edit Array (▾)✅ Edit an associative array: rows, columns, spacing, item count and more.ARRAY — Arrays
ARRAYPATH✅ Distributes copies along a path: ARRAYPATHARRAY — Arrays
ARRAYPOLAR✅ Distributes copies around a center: ARRAYPOLARARRAY — Arrays
ARRAYRECT✅ Distributes copies in rows and columns: ARRAYRECTARRAY — Arrays
ARRECT✅ Array objects into rows and columns.
ATTDEFATT, DDATTDEFDraw ▸ Block ▸ Define Attributes (▾)✅ Define an attribute to attach to a block.ATTDEF — Define attributes
ATTDISP✅ Show or hide block attributes.
ATTEDITATE, DDATTEDraw ▸ Block ▸ Edit Attributes✅
ATTEXTDDATTEXT✅ Extract attribute data to a file.
ATTIPEDIT✅ Edit attribute text in place.
ATTSYNCDraw ▸ Block ▸ Synchronize Attributes (▾)✅ Update blocks to match a changed attribute definition.
AUDIT✅ Check the drawing for errors and fix them.
AUTOCONSTRAIN✅ Automatically apply geometric constraints to the selected objects.AUTOCONSTRAIN — Auto Constrain
BASEDraw ▸ Block ▸ Set Base Point (▾)✅ Set the insertion base point of the drawing.BASE — Drawing insertion base point
BATTMANDraw ▸ Block ▸ Attribute Manager (▾)✅ Manage the attributes of a block.
BCLOSE✅ Close the Block Editor.
BLEND✅ Creates a smooth spline between two objects: BLEND
BLENDCRV✅
BLOCKB, BMOD, BMAKE, ZCADBLOCKDIALOGDraw ▸ Block ▸ Create Block✅BLOCK — Create a block
BM✅ Create a block from the selected objects (BMAKE).
BOUNDARYBO, BPOLY✅ Creates a boundary from an enclosed area: BOUNDARYBOUNDARY — Create a boundary from an enclosed area
BREAKBRDraw ▸ Modify ▸ Break (▾)✅ Breaks an object between two points: BREAKBREAK — Break objects
BREAKATPOINTBPDraw ▸ Modify ▸ Break at Point (▾)✅ Breaks an object at a point: BREAKATPOINTBREAK — Break objects
BRINGTOFRONT✅ Bring objects to the front.
BRP✅
BSAVE✅ Save the block definition being edited.
BSAVEAS✅ Save the block being edited under a new name.
CANNOSCALE✅ View or change the current annotation scale.
CCONSTRAINT✅ Hide or show the constraint bars.
CECOLOR✅ Set the current colour for new objects.
CELTSCALE✅ Set the linetype scale for new objects.LINETYPE — Linetypes and scale
CELTYPE✅ Set the current linetype for new objects.
CELWEIGHT✅ Set the current lineweight for new objects.
CENTERLINE✅ Draw a centreline between two lines.
CENTERMARK✅ Draw a centre mark for a circle or arc.
CETRANSPARENCY✅ Set the current transparency for new objects.Transparency
CHAMFERCHA✅ Bevels the corner of two objects: CHAMFERCHAMFER — Bevel a corner
CHANGE-CH✅ Quickly change properties or points of objects.
CHECKSTANDARDS✅ Check the drawing against a CAD standards file and report issues.
CHPROP✅ Change the colour, layer, linetype or lineweight of objects.CHPROP — Change properties from the command line
CHS✅ Check CAD standards (CHECKSTANDARDS).
CIRCLEC✅ Creates a circle: CIRCLECIRCLE — Circle
CIRCLE_2P✅ Creates a circle by the two ends of a diameter: CIRCLE
CIRCLE_3P✅ Creates a circle through three points: CIRCLE
CIRCLE_D✅ Creates a circle by center and diameter: CIRCLE
CIRCLE_TTR✅ Creates a circle tangent to two objects: CIRCLE
CIRCLE_TTT✅ Creates a circle tangent to three objects: CIRCLE
CL✅
CLEANSCREEN✅ Hide or show toolbars to give the drawing the most room.
CLEANSCREENOFF✅ Turn clean screen off.
CLEANSCREENON✅ Turn clean screen on.
CLIP✅ Clip the display of a block, xref or image to a boundary.
CLOSE✅ Close the current drawing.
COLORCOL, COLOUR, DDCOLOR✅COLOR — Choosing a colour
CONSTRAINTBARCBAR✅ Show or hide the constraint bar of objects.
CONSTRAINTSETTINGSCSETTINGS✅ Open the constraint settings dialog.CONSTRAINTSETTINGS — Constraint settings
COPYCO, CP, CPDraw ▸ Modify ▸ Copy✅ Copies objects: COPYCOPY — Copy objects
COPYBASE✅ Copy to the clipboard with a base point.
COPYCLIPDraw ▸ Clipboard ▸ Copy✅ Copy the selected objects to the clipboard.
CUTCLIPDraw ▸ Clipboard ▸ Cut✅ Cut the selected objects to the clipboard.